Since the launch of the X-Pro1 in early 2012, Fujifilm has received customer feedback on the camera's performance and is addressing the issues raised by launching a firmware upgrade.
On the installation of the new firmware, consumers will see a significant improvement in speed of Auto Focus, improved manual focus and processing/ writing speeds.
Improvements made after firmware update
1.Improved performance of auto focus1Focussing in challenging lighting conditions, where light is low or bright, will now be much faster in Auto Focus mode. The focusing distance has also been improved, allowing you to get closer to the subject and capture a great shot without switching to macro mode.
2.Manual Focus improved performance
The speed of the image coming into focus when turning the focus ring has been vastly improved. When adjusting the focus ring using the electronic viewfinder or the LCD panel on the back of the camera it is now much easier to focus, always displaying the image closer to full aperture with minimum depth of field.
New addition of 3x magnification for checking focusThe 10x magnifications / focus check feature on the X-Pro1 has been well received and in this firmware update an additional 3x option is now available. It is also now possible to find the optimum focus point whilst viewing the entire screen.
3.Improved writing speed/ processing speed.
Improved writing speed to memory card
At maximum speed the X-Pro1 can now write to memory card twice as fast as before. 2
Improved speed for playback after shooting
Image playback now occurs less than one second after pressing the image playback button. On some occasions previously, for example when using continuous shooting, you had to wait until the images had been processed before they were shown on screen.
4. Other additional functions
1.Auto 6400 has been added to the ISO setting. This increased ISO not only speeds up the shutter speed, but also stabilises the image and mitigates blurring of the subject.
1 The effect will differ according to the lens attached.
2 the effect will differ according to the card type and image compression.
Launch date of the dedicated firmware September 18th, 2012 600a.m. GMT
To enable these features, please update the firmware of your Fujinon XF lenses at the same time.
The firmware can be downloaded from Support on the Fujifilm website. Please go to the support website below for details on other changes. Firmware available at Fujifilm global website
The Societies of Photographers Convention and Trade Show at The Novotel London West, Hammersmith ...
You have 128 days until The Societies of Photographers Convention starting on Wednesday 22nd January 2020