DUST-CLOTH, DUST-WAND and 3inONE DSLR Cleaner

05/02/08

Today DUST-AID® introduced several new DSLR camera sensor filter cleaning products; 3inONE DSLR Cleaner™ for dry sensor cleaning and the DUST-WAND™ Kit for wet sensor cleaning. These new products deliver breakthrough features that make them truly unique sensor filter cleaning solutions.

The 3inONE DSLR Cleaner™ reinvents dry DSLR camera cleaning.
Now dry cleaning is not limited to only DSLR sensor filters. The new patent pending hinged base design of the 3inONE DLSR Cleaner™ allows for safe cleaning of DSLR camera reflex mirrors, focus screens and sensor filters. In addition, the 3inONE DLSR Cleaner™ uses specially fabricated silicone to remove dust particles. The silicone is made without the use of traditional molds which eliminates the chance of mold release agents bonding to the silicone and contaminating internal DSLR surfaces when cleaned. The 3inONE DSLR Cleaner™ has been tested and approved for all sensor filter coatings and can be used on DSLR cameras with internal dust removal systems.

DUST-WAND™ Kit: Wet cleaning with multiple wands, clips and a very unique liquid.
The DUST-WAND™ Kit delivers everything needed to safely clean every DSLR camera sensor filter aspect ratio. The kit contains three different sized DUST-WANDS’™ a pack of DUST-CLOTHS’™ for wrapping the wands, specially designed clips for securing the cloths to the wands and the very unique sensor filter cleaning liquid, ULTRA CLEAN™. The ULTRA CLEAN™ sensor cleaning liquid is one of the fastest evaporating liquids available. Due to the very fast evaporation rate there is no chance, when used properly, of liquid seeping down between the sensor filter and the sensor itself. In addition, the liquid is one of the cleanest with a non-volatile residue count of 1 part per million which helps to reduce any chance of residue being left behind. ULTRA CLEAN™ liquid is also non-flammable and non-alcohol based, making it perfect for the traveling photographer. ULTRA CLEAN™ has also been tested and approved for multiple sensor filter coatings.

DUST-CLOTH™ MF introduces an advancement in sensor cleaning wipes
DUST-CLOTH™MF brings in a new world of wet sensor filter cleaning wipes with the introduction of micro fiber cloths. Unlike the non-woven fabric used in typical sensor filter swabs and wipes, which have a troublesome tendency of leaving behind fibers, DUST-CLOTH™MF is made up of a soft micro weave which helps to eliminate fiber loss when cleaning. The DUST-CLOTH™MF is very soft and have been tested and approved for their use on multiple sensor filter coatings.

Learn more about all these new products at http://www.Dust-Aid.com.

DUST-AID® ignited a new concept in the sensor cleaning industry with its flagship product that was named after the company in 2007. Today, DUST-AID® continues to reinvent and develop new and innovative ways to clean and prevent dust from degrading digital images captured by their DSLR camera customers.

The SWPP 2008 Convention was an outstanding success,
we have 128 days to get ready for the 2009 convention - which starts on January 14, 2009

Photo Quote: I photograph to find out what something will look like photographed. - Garry Winogrand