articles/Paper/teccopaperselection-page3

Paper Chase Tecco Paper Selection - part 3 of 1 2 3 4

by Mike McNamee Published 01/08/2009

The table shows the base line statistics for the papers. We understand that SG260 Semi Gloss is no longer offered and we suspended testing part way through our audit. The Color Density settings refer only to Epson printers and are to be found in the 'Paper Configuration' dialogue.

OVERALL

Despite our reservations about the amount of OBA in three of the papers and the gamut distortions, they all performed well. As we have found previously, the use of baryta coatings delivers an excellent mix of high(ish) Dmax, good gamut, excellent overall accuracy and outstanding skin tone accuracy, along with a traditional fibre-based look.

Our favourite of the other papers was the SGD 250 for its accuracy and clean neutrals - the twin sides are a bonus! The High Gloss PHG260 also turned out good-looking prints. If you want baryta (and many enthusiasts do!) then you can choose either the ivory or plain depending upon preference, they both performed well up the standard of the 30 we have previously tested. On a cost basis these are very competitively priced papers, particulaly as they are also backed up with good profiles.

Please Note:
There is more than one page for this Article.
You are currently on page 3

Contact Mike McNamee

1st Published 01/08/2009
last update 09/12/2022 14:59:35

More Paper Articles

There are 24 days to get ready for The Society of Photographers Convention and Trade Show at The Novotel London West, Hammersmith ...
which starts on Wednesday 15th January 2025

Photography Articles from the Professional Imagemaker

Paper Chase Tecco Paper Selection - part 3 of 1 2 3 4